Menu

Product Recommendations

Clearance Banner

Bring Us Your Best Deal & We'll Beat It.

 

Manufacturer: Jensen

JENSEN JW10A

2643

Jensen 10-Inch Subwoofer with Vented Enclosure and Built-In Amplifier

The Jensen 10″ Subwoofer in Multi-Mounting Vented Enclosure is a force to be reckoned with. The vented enclosure with computer aided design vastly increases output efficiency for your subwoofer providing you with consistent low sounding bass. Its 10-inch subwoofer delivers up to 300 Watts of Peak Power and 100 Watts RMS at a 4 Ohm Impedance and Frequency Range between 40Hz-250Hz for unmatched output efficiency that suffices even bass enthusiasts.

SKU: JW10A
$169.95
$90 Off
$79.95 Or Less!
Zipcode: 
Product Availability


Features:

  • 10″ Shallow design subwoofer with grille

  • Injection-molded black polypropylene cone

  • Black rubber surround

  • High excursion design for deep bass

  • 1.5″ Voice coil

  • Durable carpeted enclosure with reinforced construction

  • Vented enclosure for greater output and deeper bass

  • Class A/B amplifier

  • Surface Mound Device (SMD) Design for efficient power

  • MOSFET power supply

  • RCA and speaker wire inputs

Specifications:

Subwoofer10 inch with Grille
Speaker TypeSubwoofer
RMS Power100 Watts
Nominal Impedance4 Ohms
Voice Coil Quantity1
Voice Coil1.5"
Sensitivity88dB
Frequency Response40 Hz ~ 250 Hz
Woofer MaterialInjection Molded Black Polypropylene
Basket MaterialStamped Steel
AmplifierVented
Amplifier ClassA/B
High ExcursionYes
VentedYes
Enclosure FeaturesCarpeted, Mounts Vertical or Down-Firing
DimensionsDown: 12.6" x 7.87" x 16.54", Up: 7.87" x 12.6" x 16.54"
SMD DesignYes
MOSFETYes
Amp InputRCA/Speaker Wire
Products specifications
Technical Information
RMS Output Power100 Rated Power
Audio
Subwoofer TypeActive

Features:

  • 10″ Shallow design subwoofer with grille

  • Injection-molded black polypropylene cone

  • Black rubber surround

  • High excursion design for deep bass

  • 1.5″ Voice coil

  • Durable carpeted enclosure with reinforced construction

  • Vented enclosure for greater output and deeper bass

  • Class A/B amplifier

  • Surface Mound Device (SMD) Design for efficient power

  • MOSFET power supply

  • RCA and speaker wire inputs

Specifications:

Subwoofer10 inch with Grille
Speaker TypeSubwoofer
RMS Power100 Watts
Nominal Impedance4 Ohms
Voice Coil Quantity1
Voice Coil1.5"
Sensitivity88dB
Frequency Response40 Hz ~ 250 Hz
Woofer MaterialInjection Molded Black Polypropylene
Basket MaterialStamped Steel
AmplifierVented
Amplifier ClassA/B
High ExcursionYes
VentedYes
Enclosure FeaturesCarpeted, Mounts Vertical or Down-Firing
DimensionsDown: 12.6" x 7.87" x 16.54", Up: 7.87" x 12.6" x 16.54"
SMD DesignYes
MOSFETYes
Amp InputRCA/Speaker Wire
Products specifications
Technical Information
RMS Output Power100 Rated Power
Audio
Subwoofer TypeActive