Menu
All Categories

    Bring Us Your Best Deal & We'll Beat It.

     

    Manufacturer: JL Audio

    JL Audio C1-570X

    7615

    JL Audio C1-570X 5x7/6x8 2-Way Speakers (Pair)

    40 Hz to 24 kHz - 4 Ohm

    SKU: C1-570X
    $119.95 Or Less!
    Available In Store OnlyAdditional discounts based on product condition
    Open box from $107
    Available at select locations.
    Open box items vary by store location. Items are typically in like new condition and all carry a full manufacturer’s warranty. Simply inquire at your local Mickey Shorr store for availability. Store Locator
    Zipcode: 
    Free shipping
    Product Availability


    JL Audio C1-570x Speaker - 50 rated power RMS - 2 Pack - 40 Hz to 24 kHz - 4 Ohm

     

    Coaxial Speaker System: 5 x 7 / 6 x 8-inch (125 x 180 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter

     

    C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.

    To facilitate fit, spacer/adaptor rings are included, allowing the C1-570x to be installed in bottom-mount applications. The speaker baskets are also equipped with slotted mounting holes to fit into 6 x 8-inch factory speaker locations.

    C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-570x is a proprietary, stamped, steel 5 x 7-inch (125 x 180 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.

    Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter's design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.

    When it comes to value, C1 is the real deal!

     

    Products specifications
    Physical Characteristics
    Mounting Depth2.46"
    Technical Information
    RMS Output Power50 Rated Power
    Tweeter Driver Size0.75"
    Woofer Driver Size4.92", 7.09"
    Tweeter Driver MaterialAluminum Dome
    Minimum Frequency Response40 Hz
    Maximum Frequency Response24 kHz
    Impedance4 Ohm
    Warranty
    Limited Warranty1 Year
    General Information
    Packaged Quantity2

    JL Audio C1-570x Speaker - 50 rated power RMS - 2 Pack - 40 Hz to 24 kHz - 4 Ohm

     

    Coaxial Speaker System: 5 x 7 / 6 x 8-inch (125 x 180 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter

     

    C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.

    To facilitate fit, spacer/adaptor rings are included, allowing the C1-570x to be installed in bottom-mount applications. The speaker baskets are also equipped with slotted mounting holes to fit into 6 x 8-inch factory speaker locations.

    C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-570x is a proprietary, stamped, steel 5 x 7-inch (125 x 180 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.

    Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter's design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.

    When it comes to value, C1 is the real deal!

     

    Products specifications
    Physical Characteristics
    Mounting Depth2.46"
    Technical Information
    RMS Output Power50 Rated Power
    Tweeter Driver Size0.75"
    Woofer Driver Size4.92", 7.09"
    Tweeter Driver MaterialAluminum Dome
    Minimum Frequency Response40 Hz
    Maximum Frequency Response24 kHz
    Impedance4 Ohm
    Warranty
    Limited Warranty1 Year
    General Information
    Packaged Quantity2